Products | Surface Mount Chip Resistors
Semi-Precision Chip Resistors
Semi-precision thick film resistors are available with resistance values from 20 mΩ to 300 MΩ, tolerances to 1% and temperature coefficient of resistance (TCR) to 100 ppm/°C. Thick film resistors have higher current capacity than the precision thin film resistors. Low resistance value devices have low current noise, but current noise increases with resistance value.
Precision Chip Resistors
Precision thin film chip resistors are available in a range of resistance values with tolerances to 0.1% and temperature coefficient of resistance (TCR) to 25 ppm/°C. Precision thin film resistors are available with resistance values from 5 Ω to 1 MΩ. The maximum resistance value decreases with decreasing case size. Thin film resistors have lower current capacity than semi-precision thick film resistors. Precision thin film resistors have low noise regardless of resistance value.
Precision resistor datasheets are available by contacting the factory.
Additional information is available on page 8 of our Catalog.
Size Code | Length | Width | Power (mW) Rating |
Voltage (V) Rating |
Thermal Resistance |
Semi-Precision Datasheet Available |
---|---|---|---|---|---|---|
0302 | .030 | .020 | 35 | 15 | 67.7 | |
0402 | .040 | .020 | 50 | 30 | 83.2 | |
0502 | .050 | .025 | 60 | 40 | 85.3 | |
0504 | .050 | .040 | 125 | 40 | 61.5 | |
0505 | .050 | .050 | 125 | 40 | 45.5 | |
0603 | .060 | .030 | 100 | 45 | 78.4 | |
0705 | .075 | .050 | 200 | 50 | 62.9 | |
1005 | .100 | .050 | 250 | 75 | 81.5 | |
1010 | .100 | .100 | 500 | 75 | 39.2 | |
1206 | .125 | .060 | 250 | 100 | 77.1 | |
1505 | .150 | .050 | 330 | 125 | 90.2 | |
2010 | .200 | .100 | 1000 | 150 | 48.4 | |
2208 | .225 | .075 | 750 | 175 | 72.7 | |
2512 | .250 | .125 | 1500 | 200 | 44.5 |
Nominal measurements are in inches.
Product Compliance information may be found HERE.
Size 0504 is not available in Type A.
Size 0705 is usually the most economical. Its use is recommended except where its size is excessive or where power and/or voltage may be exceeded.